Powered

How to connect powered speakers to mixer

How to connect powered speakers to mixer

The easiest and more effective way is to connect two powered speakers to the Main Out. One to the left and one to the right output of the mixer, then daisy chain the other two speakers. Another way is to connect two speakers to the Main Out, and then connect two more to the SUB OUT channel, also called GROUP OUT.

  1. Can you use a mixer with powered speakers?
  2. What cable do I use for mixer to powered speakers?

Can you use a mixer with powered speakers?

No. If your mixer is powered and sending an amplified signal, you will need to use passive speakers to properly operate your setup. Some powered mixers only send powered signals through the main outs. ... Using a powered speaker with a powered mixer can result in equipment damage.

What cable do I use for mixer to powered speakers?

The most common connection between mixer and powered speaker is a balanced or unbalanced line. The superior noise rejection of a balanced line allows long runs of cable between the mix station and the speakers without interference or noise. Most powered speakers have balanced XLR or TRS jacks, or both.

What is the term for assonance-like sounds, but with matching vowels on separate lines
Assonance is a resemblance in the sounds of words/syllables either between their vowels (e.g., meat, bean) or between their consonants (e.g., keep, ca...
PPQN in a 16 Step Sequencer vs DAW?
Is a sequencer a DAW?What is a 16 step sequencer?What is a step sequencer synth?Is a sequencer a DAW?Sequencers used for audio recording are called di...
What key to use for the Trio part of my Scherzo?
The trio section is in C major and is written in a contrapuntal texture. When the scherzo returns for the final time, it is performed by the strings p...