Ribbon mic frequency response

Ribbon microphones have a high-frequency response and tend to reach a higher frequency than dynamic microphones (around 14kHz). Ribbon mics have a flat frequency response curve which means the frequencies output from ribbon microphones are less altered by the microphone itself.

1. Which microphone has the best frequency response?
2. Is a ribbon microphone sensitive?
3. When would you use a ribbon microphone?
4. How much gain do ribbon mics need?

Which microphone has the best frequency response?

A microphone with a frequency response range of around 80 Hz to 15 kHz would make a good choice for a vocal mic. However for miking snares and toms, you would look for a range that starts lower, at around 50 Hz, and for a bass drum mic, you will want a low end of 40 Hz or even lower, down to 30 Hz.

Is a ribbon microphone sensitive?

Ribbon mics have a reputation for being delicate and fragile. This is due, in part, to the extremely thin ribbon material that is suspended in the magnetic gap. ... Classic ribbon mics have a lower output level than contemporary condenser mics, and their greater sensitivity to input impedance can make them sound dark.

When would you use a ribbon microphone?

Use the ribbon mic in front of blaring loud guitar amps, to capture drum overheads and even in front of kick drums — as long as no air is directly hitting the ribbon.

How much gain do ribbon mics need?

How much gain do ribbon microphones need? Ribbon microphones need at least 65dB of gain to work. Unlike standard dynamic microphones, ribbon mics require a more significant amount of gain to operate. This is because they are low-output devices.