If you can connect headphones to your amp, then your amp has a headphone output. ... The “aux in” jack on your amp, however, is just that--an input. The signal from your mp3 player, CD player or other outboard devices is traveling into the amp. Similarly, the “line out” jack on the back of your amp is just that--an output.
- What's the difference between input and output on amplifier?
- What is the output on an amp for?
- What does input and output mean on a amplifier?
- What does input mode on an amp mean?
What's the difference between input and output on amplifier?
The amplified difference between the input and output signals is known as the Gain of the amplifier. Gain is basically a measure of how much an amplifier “amplifies” the input signal. For example, if we have an input signal of 1 volt and an output of 50 volts, then the gain of the amplifier would be “50”.
What is the output on an amp for?
The main output is designed to send signal to an amp for a car speaker system. Make sure the signal going to the input of the LC2i is a full range signal otherwise it will not sound right. Ensure that the aftermarket amp has a 2 channel option for its 4 speaker outputs.
What does input and output mean on a amplifier?
The output of a typical amplifier provides several watts of power; inputs, by comparison, are not sources of audio power. On the other hand, the inputs on professional gear such as mixing boards and amplifiers provide "phantom power," a DC voltage intended to run condenser microphones.
What does input mode on an amp mean?
Speaker level inputs are used when you want to connect an amplifier to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs. It allows you to use the signal coming from the speaker outputs as an input source for the amplifier.