How to fix phase cancellation

6 Easy Ways To Eliminate Phase Cancellation In Your Mixes

1. Fix Phase Cancellation From The Beginning. ...
2. Go Beyond Polarity. ...
3. Check Layered Drum Samples. ...
4. Pay Attention When EQing Correlated Sounds. ...
5. Use Stereo Imaging Plugins With Caution. ...
6. Use Phase “Problems” To Your Advantage.

1. What causes phase cancellation?
2. Is phase cancellation bad?
3. How do you know if phase cancellation is happening?
4. How do I stop phase issues recording guitar?

What causes phase cancellation?

Phase cancellation occurs when two signals of the same frequency are out of phase with each other resulting in a net reduction in the overall level of the combined signal. If two identical signals are 100% or 180 degrees out of phase they will completely cancel one another if combined.

Is phase cancellation bad?

One of the sure ways for things to sound bad is a result of the phenomenon known as Phase Cancellation. They cancel each other out at that frequency and the result is a very weak sounding signal when mixed together. ... Here both mics are pushing and pulling together.

How do you know if phase cancellation is happening?

Look at the waveforms—they should be in sync with each other. When one wave goes up, the other wave should also be going up. If you see them going up and down at opposite intervals, you've got phase cancellation.

How do I stop phase issues recording guitar?

The 3:1 rule of mic placement is your best bet for fixing phase cancellation issues before they start. If you're using two mics on an instrument, the second mic should be exactly three times further away from the sound source as the first mic. Let's say you're miking a guitar amp.