How do I connect two audio cables?
Twist the positive ends of each wire together.
Lay the bare ends of each positive wire over each other to form an X. Then, rotate one side of the wire toward you and the other side away from you to twist the two wires together. Keep twisting until the wires are connected firmly together.
How do you install audio cables?
How to install speaker cables?
- Step 1 : Tools. ...
- Step 2 : Split the cable. ...
- Step 3 : Strip the cable. ...
- Step 4 : Form a tip. ...
- Step 5 : Unscrew the amplifier terminals. ...
- Step 6 : Connect the cables to the amplfier. ...
- Step 7 : Unscrew the speaker terminals. ...
- Step 8 : Connect the cables to the speakers.
Can you join audio cable?
There are a couple of ways to splice speaker wires. One way is to twist speaker wires together and use electrical tape. But tape wears out over time, and the smallest tug on the wires can easily separate the connection. The better option is an in-line electrical crimp connector (also known as 'butt' connector).