How are the gain knobs supposed to work / be used on DJ controllers / software?

The gain knob controls the preamplifier level, and its job is to bring the incoming signal up to line level. ... Instead, set the gain level as high as possible before the channel starts clipping. Once you set the gain, use the channel fader to balance its level within the main mix.

1. How do DJS use gains?
2. What does gain do on a DJ controller?
3. What are the knobs on a DJ controller?
4. Should I use auto gain on Serato?

How do DJS use gains?

How To Set Your Gain Stage

1. On your mixer/controller, start with the input gain – set the gains in the channel to peak just before hitting reds, while having your channel fader all the way up. This will be the highest gain you want to go on each channel.
2. Do the same with the mixer's Master volume.

What does gain do on a DJ controller?

Each channel on a DJ controller, DJ software, or mixer has a knob called gain or trim which is usually found right above the EQ. This is used to compensate for any volume level differences between your tracks.

What are the knobs on a DJ controller?

One of the most essential parts of the DJ controller is the EQ faders. Each channel usually has 3 various knobs. These knobs are the high, mid, and the low. You can use the treble knobs for controlling the highest audio frequencies.

Should I use auto gain on Serato?

SEE USE AUTO GAIN FOR MORE INFORMATION.

We recommend keeping your tracks gain set so that the deck output level is in the yellow segments for the loudest parts of your track. Keeping the level out of the red is recommended at all times.