Floyd Rose screws are too tight?

You should remove the screw and replace it in the screw hole by hand, working it back and forth while you push in on it, slightly turning it until you feel it catch, then screw in by hand. You should do this without the string in first.

1. How do you make a Floyd Rose looser?
2. Why is my floyd rose so high?
3. Why is my Floyd Rose going out of tune?

How do you make a Floyd Rose looser?

Take off the strings, screw the trem claw far out, then put new strings on and adjust it until it's level again. Other than that, you may just have to use lighter strings.

Why is my floyd rose so high?

Why is My Floyd Rose so High? If your Floyd Rose is sitting really high, it means the tension from the strings is too much for the springs in the back. Add more springs to the back cavity or adjust the back screws to balance the tension.

Why is my Floyd Rose going out of tune?

1) Your most likely issue is the guitar's setup itself. So before you assume it's the bridge, have the intonation, neck angle, etc checked. If that's off, the bridge won't function correctly. 2) The setup of the Floyd itself has 2 critical issues.