Topmusicanswers
PedalSnake P-Lines use standard 2.1mm barrel connectors (like Boss, MXR, etc.). This connector size is found on 90% of effects pedals, and on almost every 9VDC stompbox. However, Power Plug Sizes for pedals can vary.
- What size are guitar pedal power plugs?
- Can I use any 9V adapter for Boss guitar pedal?
- Do Boss pedals need a Boss adapter?
- What is 9V center negative?
What size are guitar pedal power plugs?
The standard size of a power jack on most commercial pedals, is 2.1 mm inside diameter and 5.5 mm outside diameter. The standard wiring configuration of the power jack on most commercial pedals is as follows: the positive voltage will be on the outside shell and the negative voltage is to the center pin.
Can I use any 9V adapter for Boss guitar pedal?
Most guitar effects pedal these days are powered with 9V, however there are a few exceptions, as some require 12V, 18V or even 24V. ... Most pedals, such as BOSS and MXR, require regular 9V power so pretty much any pedal supply will do.
Do Boss pedals need a Boss adapter?
You don't need a Boss adapter. Any adapter that does 220V to 9 or 110 to 9 (depending on your country), should work. Just pay attention to the jack that connects to the pedal... it must obviously fit. Have fun.
What is 9V center negative?
A center-negative plug will have the negative voltage on the center conductor and the positive voltage on the sleeve (outside) conductor. A 9V DC center-negative power supply is the de facto standard for pedals.
